This is a very large machine that is used for making large coffee filters, large pan liners, or large double or triple die baking cups. It will handle any size or configuration of size, dies that will fit into an 18″ width piece of paper. Some of these machines are running up to speeds of 45 strokes per minute, depending on what the job is that they are doing. Cycle of machine per minute is based on a number of variables – i.e. (Heat, Dwell Time, Open & Closed Flare of Cup, Type of Paper, Moisture Contents of Paper, Number Sheets of Paper Per Nest, and Weather Conditions. The Model “D” Master Cup Former may be a left or right-handed machine, customer option. Each machine can be customized to fit the customer’s needs and specifications. This machine requires a floor space of approximately 10′ wide, by between 40′ to 60′ long, depending on the rack requested, and allowing room for the operator and packer. The weight of this machine is about 10,000# with the average back stand.

Machine

• Paper Width Maximum— (18″)
• Paper Width Minimum—- (12″)
• Paper Feed Rolls (Computerized Feed System) (Standard)
• Manual Speed Control With Fly Wheel & Electric Braking System (Standard)
• Automatic A/C speed controls 0-60 cycles per minute.
• Automatic Speed Control Systems, Cycle of machine per minute is based on a number of variables – i.e. (Heat, Dwell Time, Open & Closed Flare of Cup, Type of Paper, Moisture Contents of Paper, Number Sheets of Paper Per Nest, and Weather Conditions)
• Motor 10 H.P.
• Braking System (Electric)
• Voltage Motor —(220-440)
• Voltage Heat— (220)
• Air Operated Paper Stripper. (Standard)
• Machine Width— (50″)
• Machine Length— (7′)
• Machine Height — (94″)
• Machine Weight— (5000 #)
• Bull Gear System — (22″)
• Dwell Timing System (Optional)
• Outer Ram Inside Diameter — (9″)
• Outer Ram Outside Diameter — (11″)
• Ram Bored For Triple Header —(Yes)
• Ram Bored For Double Header— (Yes)
• Guards (Standard)
• Painted— (Green)

Rack

• Paper Width Maximum— (18″)
• Paper Width Minimum— (12″)
• Paper Maximum Diameter— (20″)
• Total Number Rolls Of Paper (27) (Optional Roll Stands Upon Request)
• Brake Tension Control Manual Adjustment
• Rack Length— (16′ 6″)
• Rack Width —(4′)
• Rack Height— (94″)
• Rack Weight —(1200 #)
• Paper Guide Pins (Optional)