This is a very versatile machine that will produce cups up to a 10″ diameter blank size with a 4″ bottom size, or any combination of double dies that can be incorporated into the 10″ paper width. Most users of this machine usually have several different die sizes and change over quite often. The change over time is about 1-1/2 hours. This machine usually runs at about 60 strokes per minute. Both Manual & Automatic Speed Control Systems, Cycle of machine per minute is based on a number of variables – i.e. (Heat, Dwell Time, Open & Closed flare Of Cup, Type Of Paper, Moisture Contents of Paper, Number Sheets of Paper Per Nest, and Weather Conditions.) This machine requires a floor space of approximately 6′ wide by 20′ long, allowing for the operator and packer.

Lead- time 4 months from purchase order.

Machine:

• Paper Width Maxim— (10″)
• Paper Width Minimum— (2″)
• Paper Feed Rolls (Computerized Feed System)
• A/C speed controls (Automatic Speed Control)
• Motor 3 H.P.
• Voltage Motor— (220-440)
• Voltage Heat— (220)
• Air Operated Paper Stripper. (Standard)
• Machine Width— (38″)
• Machine Length— (4′ 6″)
• Machine Height— (6′ 6″)
• Machine Weight— (1800 Lbs)
• Bull Gear System— (12″)
• Ram Inside Diameter— (4″)
• Ram Outside Diameter— (6″0
• Ram Bored For Triple Header— (Yes)
• Ram Bored For Double Header— (Yes)
• Guards (Standard) Domestic or International.
• Painted (Choice)

Rack:

• Paper Width Minimum— (2″)
• Paper Maxim Diameter— (18″)
• Total Number Rolls Of Paper (27) (Optional Roll Stands Upon Request)
• Brake Tension Control Manual Adjustment
• Rack Length— (15′)
• Rack Width— (30″)
• Rack Height— (8′ with Paper)
• Rack Weight — (1000 Lbs)
• Paper Guide Pins (Yes)